I am selling a complete and competitive IOM (Archimedean), plus IOM parts and measurement jig. They are divided into Parcels #1- 6. Parcels can be purchased separately. Viewing available.
Parcel #1: Cheinz NZL 1369. $3,250.
Hull built by Jeff Byerley 2022. Registered January 2023.
Built to Byerley’s original West Kirby Cheinz design on new plug with adjustment by way of radius applied to the intersection of the hull and deck.
Dave Creed carbon keel fin and rudder fitted by Jeff Byerley. Bulb supplied and fitted by Jeff Byerley. Ballast is fitted to reach 4000 grams race weight.
A-Rig built to Brad Gibson dimensions and fitted with new Brad Gibson sails late 2022.
B-Rig built to Brad Gibson dimensions and fitted with new Brad Gibson sails late 2022.
Futaba T6K V2 radio with weather glove, Futaba receiver, servo and RMG 290 G2 Series winch all new late 2022. Rechargeable two cell lithium battery to run winch/ rudder. Rechargeable batteries in radio.
Regatta cradle, sail box, rig rake tool, hatch templates and spare hatch material supplied with the boat. Set up spreadsheets provided. This boat has had little use due to family demands, other hobbies and health issues. The B-rig has been used only twice.
Parcel # 2: $225
Custom built Creed carbon fibre fin with 500-gram cast lead core inside lower portion of fin. Small diameter bulb fitted to reduce frontal area by 1.8 square centimetres compared to standard bulb and fin. Quickly interchangeable with standard fin and bulb. Improves acceleration. Performance gains in winds up to 7 knots.
Parcel #3 – $475
A-Rig Rob Nelson main and jib, new, never fitted or measured. Orange detailing. A-Rig mast drilled, pre-bent and gooseneck fitted by Rob Nelson but not completed. Boom kits for main and jib. Spreaders, O-ring rigging screws and mast hook for side shrouds. Set-up data sheet for sails and booms.
Parcel #4: $120
Carbon keel fin designed by Mike Drummond and built by Steve Walters. Parallel fin with thinner chord than Creed fin. Grant Lane rudder. Both new and unused.
Parcel #5: $250.
Red Ant Stinger winch. Waterproof. Powerful winch. Compatible with RMG mounting holes and drum. Very little use; as new.
Savox SW0230 servo suitable for use with Stinger winch.
Futaba S-U300 universal servo.
Parcel #6: $160.
Hull measurement and set-up jig. MDF panels CNC cut then glued and screwed with epoxy, then sealed with epoxy. Enables class measurements to be checked, keel and rudder alignment, bulb alignment and bulb-cant adjustments. Official measuring and float tank testing still required.
Geoff Green, 0274 474 085, Whangaparaoa, Auckland.